QuickCoat
User Guide

SURFACE PREPARATION
& APPLICATION

Follow these steps to get the best cosmetic finish from your QuickCoat 20ml touch-up bottle.

Step 1

Surface Preparation

  1. 1

    Clean the damaged area thoroughly using isopropyl alcohol (IPA) and a clean cloth. Remove all wax, grease, polish residue, and dirt. Extend cleaning slightly beyond the repair area for best adhesion.

  2. 2

    Allow the surface to dry completely before application.

  3. 3

    Ensure the area is cool, dry, and out of direct sunlight.

  4. 4

    Do not touch the cleaned area after preparation, as skin oils can affect adhesion.

Step 2 · 2K Solid Colours

Application — Solid Finish

  1. 1

    Shake well before use.

  2. 2

    Apply a thin, even layer over the damaged area using the built-in brush.

  3. 3

    Apply 2 to 3 coats, allowing each layer to dry before applying the next.

  4. 4

    Build coverage gradually for best results.

  5. 5

    Allow the final coat to fully cure before handling.

Step 2 · Basecoat / Metallic

Application — Metallic Finish

  1. 1

    Shake well before use.

  2. 2

    Apply light, even coats using the built-in brush.

  3. 3

    Wait approximately 5 minutes between coats.

  4. 4

    Apply 2 to 3 coats, building colour gradually until coverage is achieved.

  5. 5

    Once dry, apply a clear coat over the basecoat for gloss, protection, and durability.

IMPORTANT NOTE

Brush application is intended for small cosmetic repairs only and will not replicate a factory spray finish. For larger areas or seamless blending, professional spray application is required.

Find Your Colour